热能燃烧设备第一站

       Contact usFavoriteEnglish繁体中文

Hot Products: Proportional ValvePressure Reducing ValveBleeding Valve Solenoid Valve Emergency cutoff Valve Actuator + Butterfly Valve Autoigniter Burners Pulsed Controller UV Probe

Location:Product Manual

Burner, Gas burner, Fuel oil burner
The product model: KIC KIO
Feature: KIO burner is equipped with steel burner pipe for connection to burner block.
The Gas Burner, Fule Oil Burner, Ignition Burner, HYR
Feature: KIO burner is equipped with steel burner pipe for connection to burner block.
KIC burner is equipped with ceramic bushing, dispensing with burner block.
Jet velocity: low, medium, high, maximum 150m/s.
Power:1.5-3000KW. Modular design.
High-speed pulsed burner, ignite and control directly. Extremely low level of pollutant emissions because of the best combustion.
Meet all the heating requirements and adapt to all kings of gases. Installed on the top or side wall.
Applications: Apply to various industrial stove and gas-fuel heater.
*Steel industry: Precious metals, nonferrous metals and light alloys industries;
*Glass, refractory materials, ceramic, enamel, minerals, rocks, etc;
*Plastics, fiber materials, paper industries;
*For secondary combustion device; *For drying apparatus and hot blast stove;
*For bell furnace, car bottom furnace, roller hearth furnace, step furnace, roaster and other heat????? treatment furnaces.????????
Heating methods: directly or indirectly.
Control mode: Intermittent: on/off, pulsed big/small fire.
Continuous: constant excess air coefficient or air flow.
Temperature: 450°C
Flame profile: flat flame, short flame, long flame.

 

Fule Oil Burner
1.The fule oil burner technical parameters:
Normal working time:f
Fule oil:0.2Mpa-0.5Mpa
Atomization: 0.06-0.1Mpa
Combustionsupporting: 3-5Kpa
2.Ignition debugging
Fule oil:: 0.1Mpa-0.2Mpa,
Atomization: 0.06Mpa
Combustionsupporting: 0.5Kpa turn down
The fule oil burner oil comsuption:
90KW:7Kg/h??? 150KW: 12 Kg/h? 230KW:18Kg/h?
320KW:25Kg/h? 450KW:35Kg/h?? 630KW:50Kg/h
1000KW:80Kg/h

Ignition Burner
Use for high-power burner security ignition:
Technical parameters:
1.Forced ignition burner
2.Air supply
3. Ignition electrode
4.Electrode feedback
5.Power: 2-7Kw
6.The gas and air highest temperature: 170℃
7.Burner shell: ALSI
8.Gas interface: Rp1/4
9.Air interface: Rp1/2
10.Applicable for various gas. The highest temperature of flame catheter:1000℃,Burner shell for 500℃.
High-speed tempering burner

Equipped with second wind casing burner of high speed tempering burner,main use for continuous operation of the kiln, Through the two air entrance can make the λ value up to 40, accurate adjustment burner temperature, two levels of mixed can ensure the air in excess cases can still maintain the best combustion state. Because exists a lot of air, the system can be reduced to a shortest cooling time.

  

About us | Product Manual | Contact us | User-centered

Copyright©2011 Foshan Delk Energy Technique Co., Ltd.   www.madas.com.cn   Retain all the power of interpretation ICP证编号:粤ICP备07005065号

If you want to solve the parameters and installation method of heat combustion system,such as proportional valve ,regulator valve, relief valve, Emergeny Cutoff Valves, Actuators + disc valves, Automatic ignition burner, pulse controller,UV probe.please browse our website!